铁路隔震连续梁桥地震碰撞响应研究

在地震作用下隔震桥梁的梁体位移比非隔震桥梁明显增加,使得相邻梁发生碰撞的概率增大。以1联3跨铁路隔震连续梁桥为例,选用3条人工地震波,采用非线性时程分析方法进行该桥的碰撞响应分析,研究梁间伸缩缝宽度和隔震支座刚度对梁间碰撞响应的影响。结果表明:随着伸缩缝宽度的增大和隔震支座刚度的增大,相邻梁碰撞的发生次数和碰撞力均有明显减小;地震作用下隔震固定墩墩底最大弯矩和最大剪力均随着隔震支座刚度的增加而增加。因此,在进行隔震桥梁设计时,应综合考虑隔震支座的隔震效果和碰撞响应,从而得到既经济又安全的隔震桥梁设计参数。     

基于混合通信顺序进程的高速铁路列控系统形式化建模与验证方法

针对高速铁路列控系统的混杂特性,提出一种基于混合通信顺序进程(HCSP)的列控系统形式化建模与验证方法。引入了HCSP的假设条件,建立列控系统的行为模型;定义了HCSP到混合自动机(HA)的转换规则,将HCSP模型转换成HA模型;利用模型检验工具PHAVer对HA模型进行自动验证。以高速铁路列控系统典型的行车许可运营场景为例,建立区间闭塞分区行车许可场景的HCSP模型;根据转换规则将行车许可场景的HCSP模型转换成HA模型;用PHAVer验证了所建立的区间闭塞分区行车许可场景模型的正确性,从而证明了基于HCSP的高速铁路列控系统建模及验证方法的有效性。     

富水砂层盾构始发井防涌水检测与加固

基于广州地铁6号线大坦沙站盾构始发井的实践,研究富水砂层中破除盾构井端头门时防涌水的施工监测和工程检测方法,根据检测和监测结果,基于朗金土压力理论进行计算分析,提出相应的加固措施和方法。介绍了具体的防水加固措施和效果。     

Hub location with flow economies of scale

A characteristic feature of hub and spoke networks is the bundling of flows on the interhub links. This agglomeration of flows leads to reduced travel costs across the interhub links. Current models of hub location do not adequately model the scale economies of flow that accrue due to the agglomeration of flows. This paper shows that current hub location models, by assuming flow-independent costs, not only miscalculate total network cost, but may also erroneously select optimal hub locations and allocations. The model presented in this paper more explicitly models the scale economies that are generated on the interhub links and in doing so provides a more reliable model representation of the reality of hub and spoke networks.     

柴油机曲轴有限元计算与台架试验数据对比分析

目前，国内柴油机行业普遍使用的曲轴弯曲疲劳强度试验台架，均采用音叉共振板结构。该试验台架对于大多数常规结构曲轴的连杆轴颈圆角疲劳强度的测定是比较准确的，但对于有些特殊结构曲轴的试验，却未能取得理想结果。以某曲轴台架试验、台架仿真模型及有限元计算模型数据为基础，分析对比了不同模型数据的差异及产生原因。     

Fuzzy-logic applied to yaw moment control for vehicle stability

In this paper, we propose a new yaw moment control based on fuzzy logic to improve vehicle handling and stability. The advantages of fuzzy methods are their simplicity and their good performance in controlling non-linear systems. The developed controller generates the suitable yaw moment which is obtained from the difference of the brake forces between the front wheels so that the vehicle follows the target values of the yaw rate and the sideslip angle. The simulation results show the effectiveness of the proposed control method when the vehicle is subjected to different cornering steering manoeuvres such as change line and J-turn under different driving conditions (dry road and snow-covered).     

Target priority determination methods by interval-valued intuitionistic fuzzy sets with unknown attribute weights

The paper aims at the problem of multi-targets threat degree being hard to be evaluated accurately in complex air defense battlefield environments. Combined with multi-sensors information fusion and interval-valued intuitionistic fuzzy sets (IVIFS) theories, the target priority determination is studied. The score and accuracy functions of IVIFS are improved with thinking about the hesitating information in order to increase the rationality. Then, the influence factors of target priority and the nonlinear relationship between the influence factors and target priority are analyzed. Next, the algorithms for calculating the factor weights and sensor weights are given. Based on the theory of IVIFS and technique for order preference by similarity to an ideal solution (TOPSIS), two methods of target priority determination based on the IVIFS and TOPSIS are proposed. At last, an application example verifies the effectiveness and flexibility of the proposed algorithms.     

Effect of interference fits on the fatigue lives of bolted composite joints

The effect of interference fits on the fatigue lives of bolted composite joints is investigated by conducting mechanical tests. Static and fatigue tests are carried out on specimens made of carbon-bismaleimide composites joined together as double-lap single-bolt joints. The bolts having interference fits ranging of 0 (neat fit), 0.5%, 0.75% and 1% are performed. The results demonstrate the relationship between fatigue life and different values of interference fits. After the fatigue tests, non-destructive evaluation (NDE) and scanning electron microscope (SEM) are used to observe the damage of the surrender and surface of the hole. The test results show that the interference fitted specimens have improved fatigue life compared to the neat fitted specimen. The NDE and SEM results reveal that the damage degree of interference fitted specimen is weaker than that for the neat fitted one.     

Estimation of origin-destination matrices from link counts and sporadic routing data

Estimation of origin-destination (OD) matrices from link count data is a challenging problem because of the highly indeterminate relationship between the observations and the latent route flows. Conversely, estimation is straightforward if we observe the path taken by each vehicle. We consider an intermediate problem of increasing practical importance, in which link count data is supplemented by routing information for a fraction of vehicles on the network. We develop a statistical model for these combined data sources and derive some tractable normal approximations thereof. We examine likelihood-based inference for these normal models under the assumption that the probability of vehicle tracking is known. We show that the likelihood theory can be non-standard because of boundary effects, and provide conditions under which such irregular behaviour will be observed in practice. For regular cases we outline connections with existing generalised least squares methods. We then consider estimation of OD matrices under estimated and/or misspecified models for the probability of vehicle tracking. Theoretical developments are complemented by simulation experiments and an illustrative example using a section of road network from the English city of Leicester.